DehumidifierFAQ.com

What Size Dehumidifier Do I Need?

Sizing

What size dehumidifier do I need?

Do not pick a dehumidifier from square feet alone. Space size matters, but so do moisture level, temperature, air movement, drainage, and how open or divided the space is.

Shop the fit, not the hype

Capacity steps you can compare

Argendon

Shield 35P

Useful when the water needs to move uphill or to a higher drain.

  • Up to 1,000 sq. ft.
  • 35 pint AHAM / 70 pint saturation
  • Gravity + built-in pump
Check current product
#ad
AlorAir

Sentinel HD55S Wi-Fi

A compact step up in capacity when a lower drain is available.

  • Up to 1,300 sq. ft.
  • 55 pint AHAM / 120 pint saturation
  • Gravity drain
Check current product
#ad
Argendon

Shield 60P

The pump-equipped choice in the Shield 60 size class.

  • Up to 1,800 sq. ft.
  • 60 pint AHAM / 145 pint saturation
  • Gravity + built-in pump
Check current product
#ad
AlorAir

Sentinel HDi90

A large-space option when the condensate needs help getting to the drain.

  • Up to 2,600 sq. ft.
  • 90 pint AHAM / 198 pint saturation
  • Built-in pump
Check current product
#ad

Coverage numbers are manufacturer claims. A wet, leaky, cold, or divided space can need a different setup.

The short answer

For ordinary portable dehumidifiers, ENERGY STAR says the capacity you need depends on both the size of the space and how damp it is. A damp room needs less capacity than a wet room of the same size. Crawlspace and whole-home units add more variables, so manufacturer coverage numbers should be treated as a starting point, not a promise.

Start with three questions

1. How big is the space?

Measure the floor area. If the space is split into separate rooms or crawlspace sections, note that too. A machine cannot dry air it cannot reach very well.

2. How wet is it before the dehumidifier runs?

A slightly musty basement is a different job from a space with damp walls, condensation, or seepage. Heavy moisture raises the load on the machine.

3. Can the water leave the machine easily?

A machine that can remove plenty of moisture still needs somewhere to put the water. If the drain is above the unit, you may need a pump.

What does the pint rating tell me?

A pint rating tells you how much water the unit removed in 24 hours under a specific test condition. It is a capacity number, not a prediction of how many pints your basement will produce every day.

Important: some commercial and crawlspace units show both an AHAM rating and a much larger saturation rating. Do not compare one brand’s saturation number with another brand’s AHAM number. See AHAM vs. saturation explained.

Why square-foot claims can mislead

Coverage claims are easy to shop by, but they do not fully describe the moisture load. A sealed 1,200-square-foot basement at 60% humidity can be an easier job than a leaky 800-square-foot crawlspace with wet soil and outside air leaking in.

When to size more carefully

Slow down if the space has standing water, active seepage, frequent flooding, very low temperatures, several separated zones, unusually high ceilings, or major outside-air leakage. Fixing the water source or air leak may matter more than buying a larger machine.

Quick helper

What kind of dehumidifier fits your setup?

You only need two answers to get a useful starting point. This is not a moisture-load calculation. It is a quick way to avoid buying the wrong drain setup.